HD2302.0

Device for measuring illuminance, luminance, PAR, irradiance. Storage of maximum, minimum, average value. Functions:

REL, HOLD and auto power off which can be disabled, IP 67 protection degree.

Supplied with: carrying case, instruction

manual, 3 batteries

LP471PHOT

Photometric probe for measuring the ILLUMINANCE, spectral response according to the photopic curve, class B according to CIE N° 69, cosine correction diffuser. Measuring range: 0.1 lux … 200·10³ lux. Cable length 1.5 m. 

HD32.3TC

Data Logger

Includes: Includes DeltaLog10 software downloadable from Delta OHM website. Supplied with carrying case, Li-ion rechargeable battery, cable CP24A, USB cable CP31, power supply SWD05 and instruction manual

TP3207.2

Temperature probe with Pt100 sensor. Probe stem Ø 14 mm, length 150 mm. Complete with

SICRAM module. Used for WBGT measurement.

TP3276.2

Globe temperature probe with Pt100 sensor, globe Ø 50 mm. Stem Ø 8 mm, length 170 mm.

Complete with SICRAM module. Used for WBGT and PMV measurement. 

HP3217R

Relative humidity and temperature combined probe. Capacitive RH sensor, Pt100 temperature

sensor. Probe stem Ø 14 mm, length 110 mm. 2 m cable. Complete with SICRAM module.

Used for PMV measurement.

AP3203.2

Omnidirectional hotwire probe. Measuring range: air speed 0.02 ÷ 5 m/s, temperature 0 ÷ +80°C. Probe stem Ø 8 mm, length 230 mm. Complete with SICRAM module. Used for PMV

measurement.

HP3201.2

Natural ventilation wet bulb. Pt100 sensor. Probe stem Ø 14 mm, length 170 mm. Complete with module SICRAM, spare cotton wick and 50 cc distilled water. 

VTRAP30

Tripod to be fixed to the instrument, height 157 mm

HD2110L.Kit1

Handheld integrating sound level meter

Includes:

HD2110L sound level meter class 1 and octave band analyzer from 16Hz to 16kHz

MC21E pre polarized condenser microphone ½”, Free field

HD2110PEL preamplifier (HD2110PEWL with opt. HD2110.OE)

HDSAV windscreen,

HD2110USB cable (alternatively, on request, HD2110RS serial cable forRS232 connection)

Noise Studio basic software downloadable from Delta OHM website

ISO 17025 Calibration Cert for sound level meter

ISO 17025 Calibration Certificate for octave bands filters.

HD2020

Sound Calibrator cl.1 IEC 60942, 94/114dB @1KHz, display, Accredia / ISO 17025 calibration

VTRAP

Tripod, max height 1310 mm

(Giá đỡ thiết bị, có thể tăng giảm chiều dài chân)

HD31

Three channel multifunction data logger for probes complete with SICRAM module. Color graphic LCD display

Includes DeltaLog9 software

Supplied with: lithium-ion rechargeable battery, SD card, protective rubber shell with magnet, USB cable CP31,

SWD05 power supply, instruction manual and carrying case.

VTRAP30

Tripod to be fixed to the instrument, height 157 mm

AP471S1

Directional hotwire probe to measure air speed in the range 0.02…40 m/s and air temperature in the range -25 °C…+80 °C.

Temperature compensation from 0 to +80 °C. Probe diameter (measurement area) 8 mm.  Probe complete with handle and

telescopic shaft. Probe complete with SICRAM module. 

HP474ACR

%RH and Pt100 temperature combined probe, with SICRAMmodule. Filter P7. Cable length 2 m. Operating range:-40…+150 °C, 0…100 %RH. 

HD2102.2

Device for measuring illuminance, luminance, PAR, irradiance. Datalogger which stores the maximum, minimum,

average value and the integral Q(t), it can store up to 38.000 samples (single probes) / 14.000 samples (combined

probes). USB output for data transfer in real time to a PC. Functions: REL, HOLD and auto power off which can be

disabled, IP 66 protection degree. Includes DeltaLog9 software downloadable from Delta OHM website

Supplied with: carrying case, instruction manual, 4 batteries, CP23 USB cable

LP471PHOT

Photometric probe for measuring the ILLUMINANCE, spectral response according to the photopic curve, class B according to CIE N° 69, cosine correction diffuser. Measuring range: 0.1 lux … 200·10³ lux. Cable length 1.5 m.

Model: GOF400VE

Surface probe with thermocouple spring strip, fast

Sensor element: Type K (NiCr-Ni)

Connection: NST1200 mini flat-pin plug

Probe Length: 100mm

Probe Diameter: Ø6 mm

Cable and Length: 1 m silicone cable

HD2302.0

Device for measuring illuminance, luminance, PAR, irradiance. Storage of maximum, minimum, average value. Functions:

REL, HOLD and auto power off which can be disabled, IP 67 protection degree.

Supplied with: carrying case, instruction manual, 3 batteries

HD2070.HA-WB

Kit to measure vibrations and evaluate exposure to hand-arm system and whole body according to ISO 5349 and ISO 2631.

The kit is composed by the following codes:

– HD2070.K1 – 3-channel vibration analyzer

– HDP356A02 –  ICP tri-axial accelerometer

– HD2030.CAB3-3M – connection cable for HDP356A02

– HD2030.124 – hand arm adapters kit

– HD2030MSP – IEPE tri-axial accelerometer with seat adapter

– HD2030.CAB3M-2M – connection cable for HD2030MSP

LP471RAD

Radiometric probe for measuring the IRRADIANCE in the spectral range 400 nm…1050 nm, cosine correctiondiffuser. Measuring range: 1.0·10ˉ³ W/m² … 2000 W/m². Cable length 1.5 m. 

HD2717T.00

Transmitter, indicator, w/o display and relay. ON/OFF regulator..

Includes: DeltaLog12 software downloadable from Delta OHM website. RS27 cable is included only for transmitters without display.

S.TC1.2

Probe  with cable.  Length of stem 135 mm, length of the cable 2 m. AISI 304 made, P7 filter, max 150 °C. 

HP3517ETC2.5

Temperature and relative humidity combined probe. 5 m cable with 8-pole M12 connector. R.H. sensor measuring

range: 0…100%. Pt100 1/3 DIN temperature sensor. Operating temperature: -40…+150 °C

HD35EDL17PTC (LCD display)

Temperature wireless data logger.

 42,000 samples

Temp Range: -40…+150°C

Relative Humidity: 0…100% RH

HD35APW

USB output, Wi-Fi and Ethernet interface

(Base unit for interfacing among PC and data loggers of the system)

HD35AP-CFR21

Advanced version of the HD35AP-S software for the management of the data logging system in accordance with the FDA 21 CFR part 11 recommendations. It works with USB hardware key (included). 

HD35.11K

Pair of flanges made of anodized aluminium alloy for the fixed installation of base unit, repeaters and data loggers in housing for indoor use. Pin for padlock and padlock included.

Specify when ordering on which instruments should be assembled.

SWD06

100-240 Vac / 6 Vdc – 1 A mains power adapter. For

HD35AP… indoor wall-mount versions and HD35RE. 

CP31

Direct USB connection cable with male mini-USB connector on the instrument side and male A type USB connector

on the PC side. Cable length 1.5 m. For HD35AP… (except HD35APD). 

HD2302.0

Device for measuring illuminance, luminance, PAR, irradiance. Storage of maximum, minimum, average value. Functions:

REL, HOLD and auto power off which can be disabled, IP 67 protection degree.

Supplied with: carrying case, instruction manual, 3 batteries

LP471PHOT

Photometric probe for measuring the ILLUMINANCE, spectral response according to the photopic curve, class B according to CIE N° 69, cosine correction diffuser. Measuring range: 0.1 lux … 200·10³ lux. Cable length 1.5 m. 

LP471UVA

Radiometric probe for measuring the IRRADIANCE in the UVA spectral range 315nm…400nm, peak at 365 nm,quartz diffuser for cosine correction. For non-destructive testing ISO 3059:2001, EN 571-1, ASTM E1417. Measuring

range: 1.0-10ˉ³ W/m … 2000 W/m². Cable length 1.5 m. 

LP471UVB

Radiometric probe for measuring the IRRADIANCE in the UVB spectral range 280 nm…315 nm, peak at 305 nm,

quartz diffuser for cosine correction. Measuring range: 1.0-10ˉ³ W/m … 2000 W/m². Cable length 1.5 m. 

LP471UVC

Radiometric probe for measuring the IRRADIANCE in the UVC spectral range 220 nm…280 nm, peak at 260 nm,

quartz diffuser for cosine correction. Measuring range: 1.0-10ˉ³ W/m … 2000 W/m². Cable length 1.5 m. 

Model: OXY3690MP-0-GOO-A1-L01-GE

Air oxygen transmitter incl. sensor

O₂ Sensor element: GOEL 370, protection gases with higher CO₂ concentrations and O₂ below < 35 vol. % O₂

Version: Open sensor design

Output Signal: 4 … 20 mA (2-wire)

Cable Length: 1.3 m

Scale analog output: Output scaled to  0 … 100 % Vol. O₂

Standard

Electrical Connection: Angle connector EN 175301-803 / A

HDP356A02

ICP tri-axial accelerometer for the measurement of the vibrations transmitted to the hand-arm system.

Includes:

– 081B05 10-32 UNF copper-beryllium alloy mounting screw

– M081B05 M6 copper-beryllium alloy mounting screw

– ACS-1T Manufacturer’s calibration card

LPPYRA03S

Spectrally flat class A pyranometer, RS485 serial output with MODBUS-RTU

protocol. Power supply 5…30 Vdc. Cable CPM12-8D…

HD35AP-CFR21

Advanced version of the HD35AP-S software for the management of the data logging system in accordance with the FDA 21 CFR part 11 recommendations. It works with USB hardware key (included). 

HD2717T.00

Model without display and without relay. 

S.TC1.5

Probe  with cable. Length of stem 135 mm, length of the cable 5 m. AISI 304 made, P7 filter, max 150 °C.